Home / ESP32 / ESP32 Weather Station using DHT11 with MicroPython (Web Server)

ESP32 Weather Station using DHT11 with MicroPython (Web Server)

Weather Station using ESP32 board and DHT11 Temperature and Humidity Sensor with MicroPython. Show Status on ESP32 Webserver.

DHT11 Temperature Sensor Module connect to ESP32 Wiring Diagram

Monitor Temperature and Humidity with DHT11 Sensor and ESP32 WebServer — Monitor Temperature and Humidity with DHT11 Sensor and ESP32 on MicroPython WebServer

MicroPython Code – ESP32 Weather Station using DHT11 on Web Server

from machine import Pin, SoftI2C
import network
import time
import socket
import _thread
import dht

# DHT11
d = dht.DHT11(Pin(23))
t = 0
h = 0

def check_temp():
    print('Check Temp Starting...')
    global t
    global h
    while True:
        try:
            d.measure()
            time.sleep(2)
            t = d.temperature()
            h = d.humidity()
            temp = 'Temp: {:.0f} C'.format(t)
            humid = 'Humidity: {:.0f} %'.format(h)
            print('DHT11:', t, h)
            time.sleep(5)
        except:
            pass

# START
print('Starting...')

# WIFI
wifi = 'Your_ssid' # your wifi ssid
password = 'Your_Password' # your wifi password
wlan = network.WLAN(network.STA_IF)
wlan.active(True)
time.sleep(3)
wlan.connect(wifi, password)
time.sleep(5)
status = wlan.isconnected() # True/False
ip ,_ ,_ ,_ = wlan.ifconfig()

if status == True:
    print('IP:{}'.format(ip))
    time.sleep(2)
    print('Connected')
else:
    print('Disconnected')

# HTML
html1 = '''
<!doctype html>
<html lang="en">
  <body style="font-family:verdana;">
  <div class="container">
  <form>
    <center>
    <h2><b>ESP32 DHT11 Sensor<b></h2>
    <h2>
'''

html2 = '''
    </h2><br>
    </center>
    </form>
  </div>
  </body>
</html>
'''

html_br = '''
     <br>
'''

# RUN

def runserver():
    global t
    global h
    s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    host = ''
    port = 80
    s.bind((host,port))
    s.listen(5)

    while True:
        client, addr = s.accept()
        print('Connection from: ', addr)
        data = client.recv(1024).decode('utf-8')
        print([data])
        temp = 'Temp: {:.0f} C'.format(t)
        humid = 'Humidity: {:.0f} %'.format(h)
        client.send(html1 + temp + html_br + humid + html2)
        client.close()

_thread.start_new_thread(runserver,())
_thread.start_new_thread(check_temp,())